Wallets · Long format · Two zip closures
A dark long wallet with two separate zip closures and a wrist strap, shown in the single authorised customer photograph held for this style. This page reads what that photograph actually supports — the two zip runs, the long flat body and the strap — then explains where a double-zip format is usually put to work, and sets out what still has to be agreed on a prototype before anything is ordered.
Format
Long wallet, double zip
Front
Two zip runs · wrist strap
Scope
Material and size per project
Product overview
A second zip is a decision about how the wallet is used, not decoration. On this long body the two runs sit side by side, which usually means the contents are split into two parts that never mix — notes and cards on one side, coins and small items on the other — and each part can be reached without opening the whole wallet. That split has a cost: two zip runs mean twice the hardware, twice the alignment risk and a body that is harder to fill evenly. The long footprint matters too, because a wallet this shape is chosen so notes stay flat instead of being folded twice. And the wrist strap changes the way it is carried — this is a piece you can hold rather than something that disappears into a pocket. Those four things, two closures, a split interior, a flat body and a strap, are what the photograph is worth reading for. Everything else — the substrate, the lining, the zip gauge, the centimetres — is a specification, not a picture.
The style name is a descriptive label written from the photograph, not a model code. Only one authorised view exists, so the interior, the reverse and the exact dimensions are agreed in writing per project rather than read off this page.
Wallets · Double-zip long wallet
What the photo shows
Each point below either can be seen in the supplied photograph or is a general construction fact about this format. No specification has been borrowed from a similar wallet.
The reason to add a second closure is separation: one run keeps notes and cards, the other keeps coins, keys or receipts. Decide what belongs on each side before the pattern is drawn, because the split determines the gusset depth on both halves.
Parallel zips are judged as a pair. If one sits a millimetre higher, or the pulls face opposite directions, the whole face looks crooked. Ask how the panels are cut and walked through the machine together, and check both runs closed, half open and fully open.
A long wallet is chosen so a note goes in without a second fold. With two compartments, weight can end up on one side, which is exactly what makes the body bow. Check the closed shape with one side loaded and the other empty, not just with everything balanced.
A strap turns the wallet into something held in the hand rather than stored in a pocket, so the anchor points take repeated load. Confirm how the strap is fixed — stitched through, riveted or looped around a bar — and pull on it on the prototype before approving.
Two zips double the parts that can misalign and double the seams that carry load. On a small object every one of those lines is visible at arm’s length, so a double-zip wallet is approved on the physical prototype, never on the drawing.
See the specification statusGeneral use
These are the occasions this format suits, written as general guidance rather than a claim about this exact piece. Each one ends with the detail to settle before a prototype is made.
A note on capacity
The photograph does not show what the compartments hold. Decide what has to fit — notes, cards, coins, receipts — before dimensions are proposed. A wallet that measures well on a table can still sit badly once both zips are full.
With a wrist strap the wallet is carried openly rather than buried in a pocket, so the face is always on show. That makes the zip lines and the edge finish the parts people actually see, and it makes a balanced fill more important than a slim profile.
Confirm how the strap is anchored and that the body stays flat when carried by it.
Two closures let a traveller keep local currency apart from home currency, or keep receipts away from notes. A long, flat body slides into a travel pouch or an airline seat pocket where a bulky zip-around will not.
Confirm which currency and documents go on each side before the interior is drawn.
Within an accessory range a double-zip long wallet usually sits above a simple flap wallet: more hardware, more compartments, a higher price step. It reads as the considered option without needing a different material family.
Agree the price step against the simpler wallets in the same finish.
A dark surface takes a debossed mark quietly, and the strap gives a gift programme something to hang a tag from. On a small object, the box and the wrapping do as much brand work as the wallet itself.
Sign off artwork, deboss depth and presentation packing before cutting.
Specification status
Format
Long wallet body carried with a wrist strap
VisibleClosures
Two separate zip runs along the body
VisibleWrist strap
Attached in the photograph; the fixing method is set with the prototype
To confirmSurface material
A dark finish is photographed; substrate and temper confirmed with a physical swatch
To confirmInterior split
What each zip compartment holds is agreed per project
Per projectClosed dimensions
Not measured or published for this style
Per projectZip and pull
Gauge, tape colour and pull shape specified together
Per projectLining
Colour and material agreed per project
Per projectEdge finish
Painted, folded or stitched according to the brief
Per projectBranding
Emboss, woven label or none — agreed against artwork
Per project“Visible” means the detail can be seen in the supplied photograph. “To confirm” means it exists but the exact figure is not recorded. “Per project” means it is set with you during development.
Before you approve a prototype
Run both zips end to end
Open and close each run fully, ten times, with the wallet empty and then loaded. A zip that catches at the curve will only get worse once the compartments are full.
Load one side only
Fill a single compartment and set the wallet down. With two closures the load rarely stays even, and any bow in a long body shows up immediately in this test.
Hang it from the strap
Hold the prototype by the wrist strap and let it swing. Check the anchor points, the stitching around them and whether the body tips — that is exactly how it will be carried.
Nearby in the folder
A long flap, a compact flap and a wrap flap show how differently the same small-goods family can close. Each of these has its own page, and the wallets category holds every photograph in the folder at size.
Before an order we confirm the surface, the interior split and the zip hardware on a physical prototype, whichever reference you start from. Photographs identify the shape, not the finished specification.
How wallet references workQuestions buyers ask
This style has one photograph and no published measurements. The answers below say what that means in practice rather than filling the space with invented detail.
Ask something elseNo. The name is a descriptive label written from the customer photograph, and this site does not publish model codes. Share this page as your reference and our team will confirm the current style reference and the specification available for your market.
The photograph shows two closure runs but not the inside, so the split is not documented. That is a design decision rather than a visual one: tell us what should live on each side — notes, cards, coins, receipts — and the interior is drawn around it.
Because none are recorded for this style. Publishing a figure that was never measured would be misleading, and scaling one from the photograph would be worse. Closed width, height and depth are set with you during development and confirmed on a physical prototype.
Usually yes, but it is a pattern question. Removing the strap changes the anchor points and the stiffening around them; changing it changes the load on those points. Ask for a technical drawing before prototyping and confirm the strap hardware will still be available for repeat orders.
The photograph shows a dark finish, but the substrate and temper are not documented in the written record. That is confirmed with a physical swatch, so you can judge the grain, the hand feel and how the surface marks before production.
We keep our own design team and can work from our original designs or from a customer's specific requirements, including ODM orders. A brief with reference images, the note and card sizes to carry, target quantity and destination market moves fastest.
A link to this page or the style name, the target quantity per colourway, the currency sizes the wallet must take, how you want the two compartments divided, and your delivery market. Anything missing can be settled in the follow-up.
Product inquiry
Quote the style name or share this page. Our design team will confirm the surface, how the two compartments are divided, the zip hardware and the closed size before anything is made up as a prototype.
The style at a glance
Dark Double-Zip Long Wallet
